380V 50Hz Msfd / VCD Door Frame Roll Forming Machine Servo Feeding System​

Equipment technique requirement:

• Equipment floor space: 23×3.0×2.5(L×W×H)meter.
• Equipment feeding material the orientation: The left side enter and right leave.
• Voltage: 380V,50Hz,3phase.
• Hydraulic oil : NO: .46#
• Gear oil: 18# Hypoid dear oil

Equipment main technical parameters:

• Raw material width: around 196 mm
• Material thickness: G.I=0.7~1.2mm
• Material: Galvanized and stainless sheet
• Production speed: around 6M/min
• Production length: ≥3000mm
• Equipment total installed capacity: Around 20KW.

Roll forming production scope

• This rollforming machine can be make the thickness from 0.8mm to 1.2mm

Parameters of main equipment:

1 - De-coiler

• Material width:≤250 mm, Material thickness≤2.0mm;
• Inner diameter:480-520 mm;
• Outer diamete:φ1200mm;
• Max. Load capacity:≤2T

2 - Leveling system

• Use 9 roller leveling,
• Power 2.2 kW,
• Speed: 10M/min

3 - Servo feeding system

4- Notching, punching hole and cutting

• Structure: hydraulic punching structure,the welded steel frame, has good inflexibility
• First notching dies: 2 sets
• First punching die:1 set
• After forming notching dies:2 sets
• After forming cutting die:1set

5 - Main rollforming machine

• Forming steps:14 group
• Forming framework: use the wall type side plategear drive
• Side wall thickness:25mm
• Max material width:≤196mm
• Min material thickness:0.7mm
• The roll shaft diameter:φ48 mm
• Roller material:Cr12MoV,the quenching hardness,HRC58-62°
• Use of double bearing design, bearing type 6208
• The main drive motor uses 5.5kw frequency conversion motor

6 - Cutting system

a.ModalityHydraulic cutting

b.Design featureafter cutting system design in the forming machine, the cutting Length can be set.

7 - Run-out table

• Framework: platform typewithout power

8 - Electrical control system

1-The whole line adopts PLC control, LCD touch screen display and man-machine interface software. (Interaction between workers and PLC.)

The operator can do the following

• The setting program (PLC)
• Monitoring the control process,
• Modify the control parameters,
• The length of the workpiece digital setting,
• The length of the workpiece adjusting.
• Running state real-time monitoring equipment and fault indication.

2- Mode of operation: manual / auto two. With manual, automatic switching function: in the manual mode, can be stand-alone operation, convenient repair; in the automatic mode, all production and operation, the start up sequence; along with the emergency stop button, easy to handle emergencies, to ensure the safety of equipment and personnel.

Wuxi Zhongborui Machinery Co., Ltd is specialized in manufacturing all kinds of roll forming machines, such as glazed tile roll forming machine, wall & roof panel roll forming machine, Floor Deck Roll Forming Machine, Metal Roofing Corrugated Tile Roll Forming Machine, U &C&Z Profile Roll Forming Machine and so on.

Our company holds a professional team of skilled experts, managerial talents with modern management consciousness, meanwhile, we committed to the research and developing of new kinds of machines, which makes us becomes stronger and stronger, from a small factory only produce single glazed tile making machine to now we have manufactured many series of roll forming machines. Our products can meet all the steel structure building requirements. Our customers are covered all over the world and the machines are export to Australia, Southeast Asia, South Africa and other regions.

Our quality principle: everyone joins in, and manufacturing conforming machine products with reasonable cost. We always design the special coil process equipment as per customer’s drawing or sample, trying our best to satisfy the customer.

After-sales service: our experts with rich experience will provide on-site commissioning.

We always keep our business principle in mind--"reliable quality" & "attentive service"

Sincerely wish to establish a long-run business relationship with friends both at home and abroad,